Smart Power Strip WiFi Surge Protector Compatible with Alexa, Google Home and IFTTT, TECKIN Smart Multiple Outlets with 4 USB Charging.

Choose your country at Amazon:
  • 【Simple To Use】:Smart plugs that Compatible with Alexa and Google Home Assistant,remotely control your lights and devices from your phone wherever you have internet. Such as 3G/4G/LTE, no hub or subscription required, just plug in and set up according to the instruction.

  • 【Control Electric Appliances & Devices】:Easily to switch your smart electronics by Smart Life APP for either iOS or Android devices, remote control, set timer and countdown, create scenes, share the device with your families at your fingertip without reaching for outlets and plugs every time. Wireless outlet enable you enjoy the convenience and pleasure of smart home more!

  • 【Multipurpose】:Designed with your best interest at heart,this mini WiFi smart plug is engineered with a built in 2.1 USB charger outlet for your extra convenience. Charge all your USB bearing devices and worry no more about low battery indications.

  • 【Safe first】:Flame retardant materials housing prolong service life. 100~240V available voltage range supports small or large power home appliances while adds security.

  • 【Quality Guaranteed】:Teckin Smart plug is FCC, ETL approved product.If you encounter any problem or need further support, please feel free to contact us through E-mail or Amazon directly. For our contact . We offer free replacement service anytime and for any reason if the plug is defective, please contact us whenever you encounter product issue.


Troubleshooting and FAQ
1.What devices can I control with the Smart Plug?
You can control lights, fans, portable heaters, and any small appliances in accordances with the Smart Plug’s specifications.

2.What should I do when I cannot turn Smart Plug on or off?
Make sure your mobile devices and the Smart Plug are connected to the same Wi-Fi network.
Make sure the devices connected to the Smart Plug are turned on.

3.What should I do when device configuration process has failed?
You could: 
Check whether the Smart Plug is powered on or not.
Check whether your mobile device is connected to 2.4 GHz WI-Fi network.
Check your network connectivity. Make sure the router is working properly:
If the router is dual-band router, please select 2.4G network and then add Smart Plug.
Enable the router’s broadcasting function.
Configure the encryption method as WPA2-PSK and authorization type as AES, or set both as auto.
Wireless mode cannot be 11n only.
Check for Wi-Fi interference or relocate the Smart Plug to another location within the signal range.
Check whether the router’s connected devices reach the amount limit. Please try to turn off some device’s Wi-Fi function and configure Smart Plug again.
Check if router’s wireless MAC filtering functions in enabled. Remove the device from filter list and make sure the router is not prohibiting Smart Plug from connection.

Make sure the password of your Wi-Fi network entered in App is correct when adding Smart Plug.
Make sure the Smart Plug is in ready for App-Configuration: the indicator light is quick blinking blue (twice per second) for quick mode configuration, slow blinking blue (once every 3 seconds) for AP mode configuration.

Repeat the App-configuration process.
Factory reset the Smart Plug and tries to add it again.

4.Can I control device through 2G/3G/4G cellular networks?
The Smart Plug and the mobile device are required to be under same Wi-Fi network when adding the Smart Plug for the first time. After successful device configuration, you can remotely control the device through 2G/3G/4G cellular networks.

5.How can I share my device with family?
Run the App Smart Life, go to “Profile” -> “Device Sharing” -> “Sent”, tap “Add Sharing”, now you can share the device with added family members.


6.How to reset this device?
Factory reset: After Smart Plug is plugged into a power socket, press and hold (for 6 seconds) the power button for factory reset until the indicator light blinks blue rapidly. Indicator lighting pattern:
Quick blinking blue (twice per second): Quick mode configuration is initiated.
Slow blinking blue (once every 3 seconds): AP mode configuration is initiated.
Solid blue: The Smart Plug is connected to the Wi-Fi network.
Solid red: Power socket of the Smart Plug is switched on. The indicator light could turn to solid red from any other status (quick/slow blinking blue, solid blue or off) by pressing the power button once and return to the previous status from solid red status (power socket is switched off) by pressing power button once again.

About Us

Project & Service

Product Series

Shopping Info

Copyright © 2019 cleanhelios All rights reserved.